iFi Pro iCAN


The Pro iCAN is as a top-of-the-line, headphone amplifier that drives anything and everything – from CIEMs through to the most difficult to drive headphone ever made, the AKG K-1000.

Gain is adjustable from 0dB/9dB/18dB. The Pro iCAN can output more than 10V in Single-Ended mode and 20V in Balanced-mode. The 20V mode is equivalent 100W into a 40 Ohm speaker.


Power like no other. Super-powerful 14,000mW headphone output power.


A fully discrete and balanced amplifier audio circuit. It operates with full-differential internal signaling.

All the way through the circuit, there is always two separate signals of equal level but opposite polarity.


The iFi exclusive S-Balanced topology makes its debut in the flagship Pro iCAN. It delivers the maximum performance from single-ended and balanced headphones alike.

Reap the benefits of balanced, enjoy lower distortion and reduced crosstalk on headphones.


You can enjoy both the sound of Solid-State and Tubes in a single package and be able to switch in real-time. For some recordings and headphones/loudspeakers, Solid-State may sound ‘more lively.’ For others, Tube and Tube+ (especially Tube+) will sound more ‘luxurious.’ Select the one that sounds best for that particular moment, be it the recording, the mood or even the weather.

There are two tube settings; Tube and Tube+. The Tube+ position reduces overall loop-gain and thus negative feedback to the minimum. This gives a different trade-off between the tube’s natural harmonics and the transient performance.


An ‘Out of Head’ listening experience. Our 3D Holographic® dual-analogue matrices place the artist with you in the room, not just in your headphones.


Sonically superior - richer, deeper.

XBass® analogue bass correction system corrects for the missing headphone/speaker bass response.

 User Manual: https://c4w4s3k2.stackpathcdn.com/wp-content/uploads/2018/07/Pro-iCAN_User-Manual.pdf

Specs:



Gain: 0dB, 9dB and 18dB user-selectable
Frequency Response: 0.5Hz to 500kHz(-3dB)
Total Harmonic Distortion (THD, Balanced/Single-Ended, S-BAL): Balanced SE (S-Bal)
Solid-State: ≤0.0015% ≤0.005%
Tube: ≤0.002% ≤0.005%
Tube+: ≤0.012% ≤0.2%
Signal-to-Noise Ratio (SNR, Balanced/Single-Ended, S-BAL): >147dB(A) / > 137dB(A)
HP Output Impedance Balanced: < 2 Ohm
Single-Ended, S-BAL: < 1 Ohm
Output Power (16Ω, Balanced/Single-Ended, S-BAL): >14,000mW / >4,800mW
Output Voltage (600Ω, Balanced/Single-Ended, S-BAL): >23V / >11.5V
Input Voltage (Pro iCAN): DC 9V/6.7A – 18V/3.35A
Input Voltage (iPower Plus): AC 85 – 265V, 50/60Hz
Power Consumption: ≤ 22W idle, 50W max.
Dimensions: 213(l) x 192.5(w) x 63.3(h) mm
Weight: 1.93kg (4.3lbs)
Test conditions: Gain = 0dB, 0.775V(0dBu) with 300 Ohm load unless stated otherwise SNR Balanced re 23V, SNR SE S-BAL re. 11.5V


Pin It Fancy

Related Items

iFi nano iDSD Lite Edition
iFi nano iDSD Lite Edition Sold Out - $139.00
+ Quick View
iFi nano iOne
iFi nano iOne Sold Out - $199.00
+ Quick View
iFi nano iDSD Black Label
iFi nano iDSD Black Label Sold Out - $199.00
+ Quick View
iFi xCAN
iFi xCAN Sold Out - $299.00
+ Quick View